Professional Design Steel Casting Company - Custom Stainless Steel Impeller by Investment Casting – RMC Foundry

Short Description:

Product Detail

Product Tags

Feedback (2)

We will constantly satisfy our respected customers with our good excellent, superior value and superior assistance due to we're additional experienced and far more hard-working and do it in cost-effective way for Vacuum Casting Manufacturer , Steel Lost Foam Casting , Steel Precision Casting Parts , On account of superior excellent and aggressive rate , we will be the sector leader, make sure you don’t hesitate to contact us by cellular phone or email, if you're fascinated in almost any of our items.

Professional Design Steel Casting Company - Custom Stainless Steel Impeller by Investment Casting – RMC Foundry Detail:

China OEM custom stainless steel impeller by lost wax investment casting process.

The base alloy elements of any nickel-base or stainless steel investment casting are chromium, nickel, and molybdenum (or “moly”). These three components will determine the casting’s grain structure and mechanical properties and will be instrumental in the casting’s ability to combat heat, wear, and corrosion.

Stainless steel has a minimum chromium content of 10.5%, making it more resistant to corrosive liquid environments and to oxidation. However, this is not absolute. Stainless steel investment castings are “corrosion-resistant” when used in liquid environments and vapors below 1200°F (650°C) and “heat-resistant” when used above this temperature.

Advantages of Investment Casting Components:
- Excellent and smooth surface finish
- Tight dimensional tolerances.
- Complex and intricate shapes with design flexibility
- Capability to cast thin walls therefore a lighter casting component
- Wide selection of cast metals and alloys (ferrous and non-ferrous)
- Draft is not required in the molds design.
- Reduce the need for secondary machining.
- Low material waste.

Materials for Investment Casting Process at RMC Foundry
Category	China Grade	US Grade	Germany Grade
Ferritic Stainless Steel	1Cr17, 022Cr12, 10Cr17,	430, 431, 446, CA-15, CA6N, CA6NM	1.4000, 1.4005, 1.4008, 1.4016, GX22CrNi17, GX4CrNi13-4
Martensitic Stainless Steel	1Cr13, 2Cr13, 3Cr13, 4Cr13,	410, 420, 430, 440B, 440C	1.4021, 1.4027, 1.4028, 1.4057, 1.4059, 1.4104, 1.4112, 1.4116, 1.4120, 1.4122, 1.4125
Austenitic stainless steel	06Cr19Ni10, 022Cr19Ni10, 06Cr25Ni20, 022Cr17Ni12Mo2, 03Cr18Ni16Mo5	302, 303, 304, 304L, 316, 316L, 329, CF3, CF3M, CF8, CF8M, CN7M, CN3MN	1.3960, 1.4301, 1.4305, 1.4306, 1.4308, 1.4313, 1.4321, 1.4401, 1.4403, 1.4404, 1.4405, 1.4406, 1.4408, 1.4409, 1.4435, 1.4436, 1.4539, 1.4550, 1.4552, 1.4581, 1.4582, 1.4584,
Precipitation Hardening Stainless Steel	05Cr15Ni5Cu4Nb, 05Cr17Ni4Cu4Nb	630, 634, 17-4PH, 15-5PH, CB7Cu-1	1.4542
Duplex Stainless Steel	022Cr22Ni5Mo3N, 022Cr25Ni6Mo2N	A 890 1C, A 890 1A, A 890 3A, A 890 4A, A 890 5A, A 995 1B, A 995 4A, A 995 5A, 2205, 2507	1.4460, 1.4462, 1.4468, 1.4469, 1.4517, 1.4770
High Mn Steel	ZGMn13-1, ZGMn13-3, ZGMn13-5	B2, B3, B4	1.3802, 1.3966, 1.3301, 1.3302
Tool Steel	Cr12	A5, H12, S5	1.2344, 1.3343, 1.4528, GXCrMo17, X210Cr13, GX162CrMoV12
Heat Resistant Steel	20Cr25Ni20, 16Cr23Ni13, 45Cr14Ni14W2Mo	309, 310, CK20, CH20, HK30	1.4826, 1.4828, 1.4855, 1.4865
Nickle-base Alloy		HASTELLY-C, HASTELLY-X, SUPPER22H, CW-2M, CW-6M, CW-12MW, CX-2MW, HX(66Ni-17Cr), MRE-2, NA-22H, NW-22, M30C, M-35-1, INCOLOY600, INCOLOY625	2.4815, 2.4879, 2.4680
Aluminum Alloy	ZL101, ZL102, ZL104	ASTM A356, ASTM A413, ASTM A360	G-AlSi7Mg, G-Al12
Copper Alloy	H96, H85, H65, HPb63-3, HPb59-1, QSn6.5-0.1, QSn7-0.2	C21000, C23000, C27000, C34500, C37710, C86500, C87600, C87400, C87800, C52100, C51100	CuZn5, CuZn15, CuZn35, CuZn36Pb3, CuZn40Pb2, CuSn10P1, CuSn5ZnPb, CuSn5Zn5Pb5
Cobalt-base Alloy		UMC50, 670, Grade 31	2.4778

INVESTMENT CASTING TOLERANCES
Inches		Millimeters
Dimension	Tolerance	Dimension	Tolerance
Up to 0.500	±.004″	Up to 12.0	± 0.10mm
0.500 to 1.000”	±.006″	12.0 to 25.0	± 0.15mm
1.000 to 1.500”	±.008″	25.0 to 37.0	± 0.20mm
1.500 to 2.000”	±.010″	37.0 to 50.0	± 0.25mm
2.000 to 2.500”	±.012″	50.0 to 62.0	± 0.30mm
2.500 to 3.500”	±.014″	62.0 to 87.0	± 0.35mm
3.500 to 5.000”	±.017″	87.0 to 125.0	± 0.40mm
5.000 to 7.500”	±.020″	125.0 to190.0	± 0.50mm
7.500 to 10.000”	±.022″	190.0 to 250.0	± 0.57mm
10.000 to 12.500”	±.025″	250.0 to 312.0	± 0.60mm
12.500 to 15.000	±.028″	312.0 to 375.0	± 0.70mm

Wax pattern for open impeller
Wax-pattern_Impeller-of-stainless-steel
stainless steel castings by investment casting

Stainless Steel Castings by Investment Casting

Product detail pictures:

Related Product Guide:

Our enhancement depends around the sophisticated devices ,exceptional talents and repeatedly strengthened technology forces for Professional Design Steel Casting Company - Custom Stainless Steel Impeller by Investment Casting – RMC Foundry, The product will supply to all over the world, such as: Surabaya , Portland , Zurich , We set a strict quality control system. We have return and exchange policy, and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our products. Please feel free to contact us for further information if you have any questions. We are glad to work for every client.

Aluminium Alloy Lost Wax Casting

Aluminium Casting Foundry

Carbon Steel Casting Supplier

Carbon Steel Shell Casting

Machining Services

Malleable Cast Iron Foundry

Precision Casting Parts

Stainless Steel Casting Products

Steel Casting

Zinc Alloy Gravity Casting

The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!